Product Description
How Toko HelX works:
Thanks to the revolutionary technology, the vital microstructure of the base is optimally coated and yet the macrostructure of the ski is not harmed. It is in this way, that the friction coefficient is significantly reduced, which in turn greatly improves gliding properties.
Using Toko HelX:
Step 1
Prepare base for waxing
Step 2
Iron-in Toko Dibloc (HF, LF) using the Toko wax iron, remove and brush-out using the Toko polishing brush.
Step 3
Pre polish the base with the yellow side of the Toko dual pads.
Step 4
Evenly spray on Toko HelX and allow to dry for at least 15 minutes at room temperature - this is a critical step - the wax must dry completely. It can sit overnight for really good adhesion. (If Helx application must be done below room temperature, rotocorking the product until dry is necessary. Only after rotobrushing, lightly brush ski with a dedicated flourocarbon polishing brush.)
Step 5
Polish the base thoroughly using the white side
Tip!
In dirty snow conditions apply a layer of rubbed on Jetstream Old Snow between sets 2 and 3. This will enhance the dirt repelling properties of Helx and the wax job in general.
Dual Pad
The Toko Dual Pad comes with every package of Helx (warm and cold) and is also available seperately. It is a necessary tool when applying Toko Helx or Nano HF2
The yellow side
Prepares/cleans the base and removes harmful remnants of wax and small particles of dust.
The white side
To be used on the base following the application of Toko HelX. Good polishing produces the warmth necessary to get optimal distribution of the fluorine molecules (gliding factors).
Thanks to the revolutionary technology, the vital microstructure of the base is optimally coated and yet the macrostructure of the ski is not harmed. It is in this way, that the friction coefficient is significantly reduced, which in turn greatly improves gliding properties.
Using Toko HelX:
Step 1
Prepare base for waxing
Step 2
Iron-in Toko Dibloc (HF, LF) using the Toko wax iron, remove and brush-out using the Toko polishing brush.
Step 3
Pre polish the base with the yellow side of the Toko dual pads.
Step 4
Evenly spray on Toko HelX and allow to dry for at least 15 minutes at room temperature - this is a critical step - the wax must dry completely. It can sit overnight for really good adhesion. (If Helx application must be done below room temperature, rotocorking the product until dry is necessary. Only after rotobrushing, lightly brush ski with a dedicated flourocarbon polishing brush.)
Step 5
Polish the base thoroughly using the white side
Tip!
In dirty snow conditions apply a layer of rubbed on Jetstream Old Snow between sets 2 and 3. This will enhance the dirt repelling properties of Helx and the wax job in general.
Dual Pad
The Toko Dual Pad comes with every package of Helx (warm and cold) and is also available seperately. It is a necessary tool when applying Toko Helx or Nano HF2
The yellow side
Prepares/cleans the base and removes harmful remnants of wax and small particles of dust.
The white side
To be used on the base following the application of Toko HelX. Good polishing produces the warmth necessary to get optimal distribution of the fluorine molecules (gliding factors).
Product Tags
Add Your Tags:
Use spaces to separate tags. Use single quotes (') for phrases.
